Sensor Component
SST-Refrigeration and Air-conditioning and Industrial Control Pressure Switches and Sensors

product model
45CP

Application: Inverter system control.
 
  • This specification covers solid state pressure sensor that fits for refrigerant air conditioning system of R22、R134a and R407C
  • Sensata- Part:45CP2-1, 45CP2-2, 45CP2-3, 45CP2-4, 45CP2-5, 45CP2-6, 45CP2-7.
  • Pressure range:0.0 to 4.6 MPa g (g: gauge)。
  • Operating temperature:- 30°C to 135°C。
  • Power voltage(Vin):5.0 +/- 0.1 VDC。
  • Output voltage(Vout):0.89 to 4.5 V typical。
  • Initial accuracy:+/- 2.5% Vdd at -30°C to 135°C. Vdd = DC5.0V。
  • Overall accuracy:+/-3.5% Vdd at -30°C to 135°C. Vdd = DC5.0V。
  • Power current: 10 mA Max no olad.
  • Resistance to voltage: (between each terminal and the body).
  • Resistance to pressure: the maximum working pressure.
  • Burst pressure: the maximum working pressure.
  • Mounting Torque:12.7 Nm +/-10%。
  • Fall testing:1.0 m one time on concrete floor, no deformation.
  • Overvoltage:DC 16V , 30sec。
  • Reverse voltage:DC -12V, 30sec。
  • Electrical connection:10k ohm pull-down resistor.
  • Pressure Connection:1/4” SAE flare-up thread female : 7/16-20UNF 2B
  • Pressure cycle life test:able to withstand 5 million times of full working pressure cycle at room temperature.

SST-Refrigeration and Air-conditioning and Industrial Control Pressure Switches and Sensors

product model
45CP

Application: Inverter system control.
 
  • This specification covers solid state pressure sensor that fits for refrigerant air conditioning system of R22、R134a and R407C
  • Sensata- Part:45CP2-1, 45CP2-2, 45CP2-3, 45CP2-4, 45CP2-5, 45CP2-6, 45CP2-7.
  • Pressure range:0.0 to 4.6 MPa g (g: gauge)。
  • Operating temperature:- 30°C to 135°C。
  • Power voltage(Vin):5.0 +/- 0.1 VDC。
  • Output voltage(Vout):0.89 to 4.5 V typical。
  • Initial accuracy:+/- 2.5% Vdd at -30°C to 135°C. Vdd = DC5.0V。
  • Overall accuracy:+/-3.5% Vdd at -30°C to 135°C. Vdd = DC5.0V。
  • Power current: 10 mA Max no olad.
  • Resistance to voltage: (between each terminal and the body).
  • Resistance to pressure: the maximum working pressure.
  • Burst pressure: the maximum working pressure.
  • Mounting Torque:12.7 Nm +/-10%。
  • Fall testing:1.0 m one time on concrete floor, no deformation.
  • Overvoltage:DC 16V , 30sec。
  • Reverse voltage:DC -12V, 30sec。
  • Electrical connection:10k ohm pull-down resistor.
  • Pressure Connection:1/4” SAE flare-up thread female : 7/16-20UNF 2B
  • Pressure cycle life test:able to withstand 5 million times of full working pressure cycle at room temperature.